Commercial ATV / Mower Strap

Firmly secure the rear wheels of an ATV or lawn mower to a trailer bed with this Commercial ATV / Mower Strap. 

Capable of supporting a maximum vehicle weight of 1500 lbs. (680 kg), this wheel chock and tie-down strap kit is designed to secure the front and back of both rear wheels on an ATV, lawn mower, small farm tractor, or construction equipment to a trailer bed.

The double slotted E-fitting allows for the proper hook-up on both small and large tires, allowing it to be used on tires ranging in diameter from 10" to 30". The included wheel chocks mount permanently to the trailer bed and can be driven over when loading and unloading, so there is no need to disassemble the wheel chocks. 

The Commercial Mower Strap Kit includes:

• 4 x E-Trak Wheel Chocks that are powder coated
• 2 x E-Trak Ratchet Straps that measure 6' long x 2" wide

Safety Notes: Never exceed the working load limit of the straps (maximum weight of the secured cargo). Do not use if the webbing is torn or damaged and do not use webbing on sharp edges. Be sure to check the load and ratchet every 30 miles (50 km) and make adjustments when necessary. Always be aware of the cargo weight to be tied down. The cargo will be tripled in weight for emergency stops. Use a mandatory 3:1 safety ratio to ensure the maximum load capacity of the straps is not exceeded.

Features:

• Kit includes 4 E-Trak Wheel Chocks and 2 x E-Trak Ratchet Straps (6' L x 2" W)
• Secures the front and back of both rear wheels on an ATV, lawn mower, small farm tractor, or construction equipment to a trailer bed
• Supports maximum vehicle weight of 1500 lbs. (680 kg)
• Fits tires 10" to 30" in diameter
• Installation instructions included (requires proper sized nuts and bolts, flat and spring washers)